“�‚ Latest Formula‚ - High abrasion with a simultaneous good degree of shine, workable for a long time, with an outstanding wipe-off feature.
“�‚ Advanced‚ Formula‚ - SONAX Cut & Finish is an innovative polish with an intense abrasive effect for quickly eradicating defective spots, such as dust occlusion, paint overspray, and sanding marks following repair spraying.
“�‚ Polishes Sanded Surfaces‚ - ‚ Perfect Finish was developed for polishing sanded down surfaces. Removes sanding grooves made by P1500 abrasive paper.
“�‚ Safe to Use‚ -‚ Silicone-free makes it safe for use in body shops and collision centers.
Directions for use:
Apply a small amount (3 or 4 Dime-sized drops) of polish onto‚ a Polishing Pad. Polish the surface at a low rotating speed (800 rpm) for approximately 20-30 seconds, applying 15-20 pounds of pressure. After 30 seconds, remove pressure completely using only machine weight, increase machine speed (1200 RPM) and continue polishing for 45-60 seconds. When finished polishing, wipe down the paint surface with an Ultra-fine Microfiber Cloth.
Do not allow polishing area to overheat. Regularly clean polishing sponges. Never use different polishes on one sponge, Keep from freezing.